HVAC controls optimisation at pharmaceutical manufacturing facility
Posted on by Catherine Blackwell[addtoany]
EECO2 have identified 5,847,000 kWh of annual energy savings, equating to $900,000 USD, over two pharmaceutical manufacturing sites in Puerto Rico.
EECO2 identified, following initial energy reviews carried out across both manufacturing sites, that the heating, ventilation and air conditioning (HVAC) and building management system (BMS) were not operating optimally and that efficiency improvements could be realised.
While the HVAC systems were delivering compliant facility temperature and humidity control, the systems were delivering this at an energy expense with failed equipment. In addition to the energy cost, it was suspected that control devices and readings within the BMS may have been from faulty sensors and valves, often leading to manual interventions to the systems which can reduce the ability of the system to respond efficiently to environmental conditions, both internally and externally.
Our brief therefore included the identification and implementation of remediation work to correct and clear any underlying faults.
Click here to read the full case study on this project.
Our latest Case Study is available to read, results: 30% reduction
in electrical energy consumption for the building and £78k
annual electrical energy cost saving: https://t.co/81ALQvFiRA #university #labs #energyefficiency #savings #carbonreduction
Delighted to receive the Autumn issue of 'Clean Air and Containment Review', especially as EECO2 features in the News section. See pages 27 and 28 to read about our in-house cleanroom. For the latest EECO2 News, visit: https://t.co/n7P2FmTWNr #cleanroom #energyefficiency
And the final winner is... Steven Marles from Bouygues #welldone #winner #chillyseverywhere
Sign up to the knowledge hub